Promag CON-485 Series Instrucciones de operaciones Pagina 88
- Pagina / 98
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
10 Technical data Memo-Graph S
88 Endress+Hauser
Given that this is an interface for industrial use, a screened cable (CAT5) must be used.
If a PC is to be connected directly (without Hub or Switch) then a so called cross-over cable must
be used.
PROFIBUS DP connection
(option)
“Bus monitor” function - Multi-channel PROFIBUS display and registration
(Without influence on PROFIBUS system) as with conventionally-connected components. (Serial
interface, rear-mounted, alternative to RS 485 interface)
Physical level: RS 485, cable length 1000 m / 0.62 mi screened cable
Baudrate: 93.75 kBaud, fixed, alternatively 45.45 kBaud
Adjustable slave address
Data formats (DP/V1 formats): Integer 8, Integer 16, Integer 32, Unsigned 8, Unsigned 16, Unsig-
ned 32, Floating point (IEEE 754)
Functions of PROFIBUS measuring points is identical to conventional analogue inputs.
The combined use of PROFIBUS and conventional measuring points is possible (tot. max. 16 measu-
ring points / device).
Connection of PROFIBUS PA measuring points via PA/DP segment coupler.
“Profibus slave” function - Bi-directional function e.g. with PLC systems
Slave functions in combination with Profibus coupler (Accessories: RSG12A-P1). Insert for bi-direc-
tional communication in cyclic data transfer.
Baudrate: max. 12 Mbaud, adjustable
!
Note:
When used in legal validation applications, please take note of the additional requirements for a
PROFIBUS DP Master System.
10.5 Accuracy
Reference operating
conditions
Ambient temperature
influence
0.015 % / K of measurement range
Base accuracy see Input values
10.6 Operating conditions
10.6.1 Installation conditions
Installation instructions Mounting location
Control panel or desk top version
Orientation Place of application as per DIN 16257: NL90 ±30°
10.6.2 Environmental conditions
Working temperature 0 to +50 °C / 32 to 122 °F
Storage temperature -20 to +70 °C / -4 to 158 °F
Electrical safety Environment < 2000 m altitude above sea level
Climate class As per EN 60654-1: B1 (10 to 75 % r. F., without condensation)
Reference operating conditions
Power supply 230 V
AC
± 10%, 50 Hz ± 0.5 Hz
Warm-up time > 1 hour
Ambient temperature 25 °C ± 5 °C / 77 °F ± 9 °F
Humidity 55 ± 10 % r. F.
- Safety Data Manager (SDM) 1
- Memo-Graph S 1
- Overview 2
- Brief overview 2
- CHANGE PROTOCOL 3
- Table of contents 5
- 1 Safety instructions 7
- 1.4 Operational safety 8
- 1.5 Return 8
- 2 Identification 9
- 2.1.2 Product structure 10
- 3 Installation 11
- 3.3 Installation instructions 12
- 3.4 Post-installation check 12
- 4 Wiring 13
- 4 Wiring Memo-Graph S 14
- 14 Endress+Hauser 14
- 4.2 Terminal diagram 15
- 4.2.5 CPU board (slot 0) 19
- Ethernet connection 21
- 4.4 Ingress protection class 22
- 4.5 Post-connection check 22
- Set-up to commissioning 23
- 5.5 Set-up using PC 26
- 5.7.1 Basic settings 27
- 5.7.2 Signal settings 31
- Factory setting “0” 32
- 36 Endress+Hauser 36
- # Warning! 37
- " Caution! 38
- Endress+Hauser 43 43
- 44 Endress+Hauser 44
- 5.7.4 Products 48
- 5.7.5 Texts 50
- 5.7.6 Administration 50
- 5.7.8 Service 53
- 5.9.1 RS 232 56
- 5.9.2 RS 485 56
- 5.9.3 PROFIBUS DP 56
- 5.10.2 MAC address 58
- 5.10.3 IP address allocation 58
- 5.10.4 Subnet mask allocation 59
- 5.10.5 Gateway allocation 59
- 21 CFR 11 61
- 6.2.3 Administration 63
- 6.2.5 Analogue inputs 64
- 6.3.1 General 64
- Endress+Hauser 67 67
- 68 Endress+Hauser 68
- 7 Procedure in operation 69
- 7.2 The functions in detail 72
- 7.2.3 Enter comment / text 74
- 7.2.5 Extras 74
- 7.2.6 Set-up 77
- 8Accessories 78
- Software 79
- Operating language 79
- RSG12A1 79
- 80 Endress+Hauser 80
- 9.4 Spare parts 81
- 9.4.2 Spare parts list 82
- Endress+Hauser 83 83
- 9.5 Repairs/return 84
- 9.6 Disposal 84
- Measured variable / 85
- _ _ _ _ _ 86
- 10.3 Output values 87
- 10.4 Power supply 87
- 10.5 Accuracy 88
- 10.6 Operating conditions 88
- 10.7 Mechanical construction 89
- 320 mm (12.6“) 91
- 320 mm (12.6 “) 91
- 254 mm (10 “) 91
- 10.9 Data storage 92
- 10.11 Accessories 93
- 10.12 Further documentation 93
- BA 138R/09/en/08.04 98
- 51006049 98
- FM+SGML 6.0 98
Relacionado con productos y manuales para Herramientas de medición y de diseño Promag CON-485 Series
(40 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.099 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales